AEM "ETI" Air Intake System für Toyota GT86 / Subaru BRZ

AEM "ETI" Air Intake System für Toyota GT86 / Subaru BRZ

449,00 EUR

incl. 19 % USt zzgl. Versandkosten

Lieferzeit 1 Woche

0 Bewertung(en) | Bewertung schreiben

Art.Nr.: 41-1408DS


AEM "ETI" Air Intake System für Toyota GT86 / Subaru BRZ

ETI = Electronically Tuned Intake

- mehr Leistung & Sound!
- inkl. Montagematerial
- inkl. AEM® Dryflow™ Filter
- TÜV-Eintragung nach §21 erforderlich!

The Next Generation of Air Intake Technology

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to "trick" the MAF reading. The result is bigger horsepower and torque gains.

Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to "under report" air flow causing a lean condition or triggering a Check Engine Light. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU.

AEM's ETI Intake Systems use an alternative design approach that allows the intake tube to maintain its diameter, resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead, the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.

Estimated Horsepower Gain: 10 HP @ 6500 RPM

For Dyno chart, see here:


Sie haben noch keine Artikel in Ihrem Warenkorb.

Warenkorb »

Willkommen zurück

Passwort vergessen?


Skunk2 Racing

Skunk2 Racing " Rear Lower Control Arms" für Honda Civic EP3
Statt 249,00 EUR
Nur 179,00 EUR
Sie sparen 28 %

JAPSPEED "Universal V2 Fender Flares" Set 75cm
JAPSPEED "Universal V2 Fender Flares" Set 75cm
Statt 199,00 EUR
Nur 149,00 EUR
Sie sparen 25 %
JAPSPEED Fächerkrümmer für Honda S2000
JAPSPEED Fächerkrümmer für Honda S2000
Statt 349,00 EUR
Nur 279,00 EUR
Sie sparen 20 %
INVIDIA "Cat-Back G200-Ti" Abgasanlage für Honda Civic EP3 Type R
INVIDIA "Cat-Back G200-Ti" Abgasanlage für Honda Civic EP3 Type R
Statt 699,00 EUR
Nur 649,00 EUR
Sie sparen 7 %